Show simple item record

dc.contributoren-US
dc.creatorHector, Ruiz
dc.creatorNaoki, Osawa
dc.creatorHidekazu, Murakawa
dc.creatorHidekazu, Murakawa
dc.creatorSherif, Rashed
dc.creatorHector, Ruiz
dc.creatorNaoki, Osawa
dc.creatorHidekazu, Murakawa
dc.creatorHidekazu, Murakawa
dc.creatorSherif, Rashed
dc.date2018-02-11
dc.date.accessioned2018-02-23T17:16:19Z
dc.date.available2018-02-23T17:16:19Z
dc.identifierhttps://knepublishing.com/index.php/KnE-Engineering/article/view/1438
dc.identifier10.18502/keg.v3i1.1438
dc.identifier.urihttp://ridda2.utp.ac.pa/handle/123456789/4274
dc.descriptionWelding is the most widely used assembly method available to industries in the construction of metal structures, ships, and offshore platforms. However, this method always produces a certain amount of distortion that will not only degrade the performance but also increase the building cost of the structure, and it should be straightened. Murakawa [1] developed a thermal elastic plastic based and inherent strain based welding simulation FE code JWRIAN. Coarse shell FE models are usually used in the inherent strain based JWRIAN elastic analyses. This drastically reduces the manpower needed for modeling and computer resources needed for the calculation. However, it is not easy to perform straightening analysis using JWRIAN because gas heating’s inherent strain distributes over a range much smaller than element sizes of the shell model.RUIZ [2] modified JWRIAN’s code so that the inherent strain equivalent nodal forces along the heating line are calculated and applied in the elastic shell analysis. However, a discrepancy between 3-dimensional thermal-elastic-plastic analysis and elastic analysis was observed. This is mainly because of the nature of solid and shell elements. RUIZ [3] proposed a linearized inherent strain and applied it to both 3-d and 2d analysis, getting matching results between solid and shell element models. In this study, as a working example, a thin plate panel with an opening is considered utilizing the developed system at the same time a friendly user interface for staffs and workers on a production site is developed.  Keywords: Inherent strain, straightening, finite element method, Gauss-Legendre quadratureen-US
dc.formatapplication/msword
dc.formatapplication/pdf
dc.formatapplication/xml
dc.languageeng
dc.publisherKnE Publishingen-US
dc.relationhttps://knepublishing.com/index.php/KnE-Engineering/article/view/1438/3248
dc.relationhttps://knepublishing.com/index.php/KnE-Engineering/article/view/1438/3479
dc.relationhttps://knepublishing.com/index.php/KnE-Engineering/article/view/1438/3480
dc.rightsinfo:eu-repo/semantics/openAccess
dc.rightshttps://creativecommons.org/licenses/by/4.0/
dc.source2518-6841
dc.sourceKnE Engineering; 6th Engineering, Science and Technology Conference - Panama 2017 (ESTEC 2017); 332-343en-US
dc.titleDevelopment of a Practical Straightening Simulation for Welded Structures Using Inherent Strain Methoden-US
dc.typeinfo:eu-repo/semantics/article
dc.typeinfo:eu-repo/semantics/publishedVersion


Files in this item

FilesSizeFormatView

There are no files associated with this item.

This item appears in the following Collection(s)

Show simple item record