Show simple item record

dc.contributor.authorBethancourt, Geomara
dc.contributor.authorJames Rivas, Arthur
dc.contributor.authorVillarreal, José E.
dc.contributor.authorMarín-Calvo, Nacarí
dc.date.accessioned2020-03-03T16:13:16Z
dc.date.accessioned2020-03-03T16:13:16Z
dc.date.available2020-03-03T16:13:16Z
dc.date.available2020-03-03T16:13:16Z
dc.date.issued2019-12-30
dc.date.issued2019-12-30
dc.identifierhttps://ieeexplore.ieee.org/abstract/document/8943766
dc.identifier.other10.1109/IESTEC46403.2019.00016
dc.identifier.urihttps://ridda2.utp.ac.pa/handle/123456789/10104
dc.identifier.urihttps://ridda2.utp.ac.pa/handle/123456789/10104
dc.descriptionThe present work had the objective to produce and characterize charcoal from rice husks. The rice husk was generated in a Top-lit updraft reactor. This process was favorable for biochar production. By increasing the airflow from 12 to 24 L/min, the reaction temperature increased from 714 to 935 ° C (R 2 = 0.90), respectively. Similarly, the average productivity varied from 29.35 and 20.69 % between the minimum and maximum flows, respectively. This indicated that a higher reaction temperature demanded a greater amount of biomass to reach at higher temperatures. Similarly, it was evidenced that the airflow produced an effect on the physicochemical properties of the biochar produced. For example: the phosphorus concentration increased from 0.43 to 1.12% (R 2 =0.47) when the air flow increased from 12 to 24 L/min. Additionally, the potassium content, organic carbon and manganese also increased as the airflow increased. Finally, it was observed that the biochars produced had a high alkalinity pH> 9.3 for all the airflows considered. These results indicated that the biochar produced can be implemented for the improvement of degraded soils.en_US
dc.description.abstractEl presente trabajo consistió en producir y caracterizar carbón vegetal a partir de la cascarilla de arroz. La cascarilla de arroz fue generada en un reactor de flujo ascendente tipo Top-lit. Este proceso fue favorable para la producción de biocarbón. Al incrementar el flujo de aire de 12 a 24 L/min, la temperatura de reacción aumentó de 714 a 935°C (R2=0.90), respectivamente. De igual manera, la productividad promedio varió entre 29.35 y 20.69 % entre el flujo mínimo y el máximo, respectivamente. Esto indicó que una mayor temperatura de reacción demandó una mayor cantidad de biomasa para alcanzar temperaturas superiores. De manera similar, se evidenció que el flujo de aire produjo un efecto en las propiedades fisicoquímicas del biocarbón producido. Por ejemplo: la concentración de fósforo incrementó de 0.43 a 1.12% (R2=0.47) cuando el flujo de aire incrementó de 12 a 24 L/min. Adicionalmente, el contenido de potasio, carbón orgánico y manganeso también aumentaron al incrementar el flujo de aire. Finalmente, se observó que el biocarbón producido tuvo una alcalinidad alta pH>9.3 para todos los flujos de aire considerados. Estos resultados indicaron que el biocarbón producido puede ser implementado para el mejoramiento de suelos degradados.en_US
dc.formatapplication/pdf
dc.languageeng
dc.language.isoengen_US
dc.publisher2019 7th International Engineering, Sciences and Technology Conference (IESTEC)en_US
dc.publisher2019 7th International Engineering, Sciences and Technology Conference (IESTEC)
dc.rightsinfo:eu-repo/semantics/embargoedAccess
dc.titleBiomass carbonization - Production and characterization of biochar from rice husksen_US
dc.typeinfo:eu-repo/semantics/articleen_US
dc.typeinfo:eu-repo/semantics/article
dc.typeinfo:eu-repo/semantics/publishedVersion


Files in this item

FilesSizeFormatView

There are no files associated with this item.

This item appears in the following Collection(s)

Show simple item record